Product Description
SPROCKET 1/2” X 5/16” 08B SERIES SPROCKETS
For Chain Acc.to DIN8187 ISO/R 606 | |||||
Tooth Radius r3 | 13.0mm | ||||
Radius Width C | 1.3mm | ||||
Tooth Width b1 | 7.0mm | ||||
Tooth Width B1 | 7.2mm | ||||
Tooth Width B2 | 21.0mm | ||||
Tooth Width B3 | 34.9mm | ||||
08B SERIES ROLLER CHAINS | |||||
Pitch | 12.7 mm | ||||
Internal Width | 7.75 mm | ||||
Roller Diameter | 8.51 mm |
Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
D1 | D2 | D3 | |||
8 | 37.2 | 33.18 | 8 | 10 | 10 |
9 | 41.0 | 37.13 | 8 | 10 | 10 |
10 | 45.2 | 41.10 | 8 | 10 | 10 |
11 | 48.7 | 45.07 | 10 | 10 | 12 |
12 | 53.0 | 49.07 | 10 | 10 | 12 |
13 | 57.4 | 53.06 | 10 | 10 | 12 |
14 | 61.8 | 57.07 | 10 | 10 | 12 |
15 | 65.5 | 61.09 | 10 | 10 | 12 |
16 | 69.5 | 65.10 | 10 | 12 | 16 |
17 | 73.6 | 69.11 | 10 | 12 | 16 |
18 | 77.8 | 73.14 | 10 | 12 | 16 |
19 | 81.7 | 77.16 | 10 | 12 | 16 |
20 | 85.8 | 81.19 | 10 | 12 | 16 |
21 | 89.7 | 85.22 | 12 | 16 | 16 |
22 | 93.8 | 89.24 | 12 | 16 | 16 |
23 | 98.2 | 93.27 | 12 | 16 | 16 |
24 | 101.8 | 97.29 | 12 | 16 | 16 |
25 | 105.8 | 101.33 | 12 | 16 | 16 |
26 | 110.0 | 105.36 | 16 | 16 | 16 |
27 | 114.0 | 109.40 | 16 | 16 | 16 |
28 | 118.0 | 113.42 | 16 | 16 | 16 |
29 | 122.0 | 117.46 | 16 | 16 | 16 |
30 | 126.1 | 121.50 | 16 | 16 | 16 |
31 | 130.2 | 125.54 | 16 | 16 | 20 |
32 | 134.3 | 129.56 | 16 | 16 | 20 |
33 | 138.4 | 133.60 | 16 | 16 | 20 |
34 | 142.6 | 137.64 | 16 | 16 | 20 |
35 | 146.7 | 141.68 | 16 | 16 | 20 |
36 | 151.0 | 145.72 | 16 | 20 | 20 |
37 | 154.6 | 149.76 | 16 | 20 | 20 |
38 | 158.6 | 153.80 | 16 | 20 | 20 |
39 | 162.7 | 157.83 | 16 | 20 | 20 |
40 | 166.8 | 161.87 | 16 | 20 | 20 |
41 | 171.4 | 165.91 | 20 | 20 | 25 |
42 | 175.4 | 169.94 | 20 | 20 | 25 |
43 | 179.7 | 173.98 | 20 | 20 | 25 |
44 | 183.8 | 178.02 | 20 | 20 | 25 |
45 | 188.0 | 182.07 | 20 | 20 | 25 |
46 | 192.1 | 186.10 | 20 | 20 | 25 |
47 | 196.2 | 190.14 | 20 | 20 | 25 |
48 | 200.3 | 194.18 | 20 | 20 | 25 |
49 | 204.3 | 198.22 | 20 | 20 | 25 |
50 | 208.3 | 202.26 | 20 | 20 | 25 |
51 | 212.1 | 206.30 | 20 | 25 | 25 |
52 | 216.1 | 210.34 | 20 | 25 | 25 |
53 | 220.2 | 214.37 | 20 | 25 | 25 |
54 | 224.1 | 218.43 | 20 | 25 | 25 |
55 | 228.1 | 222.46 | 20 | 25 | 25 |
56 | 232.2 | 226.50 | 20 | 25 | 25 |
57 | 236.4 | 230.54 | 20 | 25 | 25 |
58 | 240.5 | 234.58 | 20 | 25 | 25 |
59 | 244.5 | 238.62 | 20 | 25 | 25 |
60 | 248.6 | 242.66 | 20 | 25 | 25 |
62 | 256.9 | 250.74 | 25 | 25 | 25 |
64 | 265.1 | 258.82 | 25 | 25 | 25 |
65 | 269.0 | 262.86 | 25 | 25 | 25 |
66 | 273.0 | 266.91 | 25 | 25 | 25 |
68 | 281.0 | 274.99 | 25 | 25 | 25 |
70 | 289.0 | 283.07 | 25 | 25 | 25 |
72 | 297.2 | 291.15 | 25 | 25 | 25 |
75 | 309.2 | 303.28 | 25 | 25 | 25 |
76 | 313.2 | 307.32 | 25 | 25 | 25 |
78 | 321.4 | 315.40 | 25 | 25 | 25 |
80 | 329.4 | 323.49 | 25 | 25 | 25 |
85 | 349.0 | 343.69 | 25 | 25 | 25 |
90 | 369.9 | 363.90 | 25 | 25 | 25 |
95 | 390.1 | 384.11 | 25 | 25 | 25 |
100 | 410.3 | 404.32 | 25 | 25 | 25 |
110 | 450.7 | 444.74 | 25 | 25 | 25 |
114 | 466.9 | 460.91 | 25 | 25 | 25 |
120 | 491.2 | 485.16 | 25 | 25 | 25 |
125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
Type: |
Simplex, Duplex, Triplex |
Sprocket Model: |
3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″ |
Teeth Number: |
9-100 |
Standard: |
ANSI , JIS, DIN, ISO |
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
Design criterion | ISO DIN ANSI & Customer Drawings |
Application | Industrial transmission equipment |
Package | Wooden Case / Container and pallet, or made-to-order |
Certification: |
ISO9001 SGS |
Quality Inspection: |
Self-check and Final-check |
Sample: |
ODM&OEM, Trial Order Available and Welcome |
Advantage | Quality first, Service first, Competitive price, Fast delivery |
Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
---|---|---|---|---|
25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
---|---|---|---|
1⁄4 | 2⁄8 | 25 | 1⁄8 |
3⁄8 | 3⁄8 | 35 | 3⁄16 |
1⁄2 | 4⁄8 | 41 | 1⁄4 |
1⁄2 | 4⁄8 | 40 | 5⁄16 |
5⁄8 | 5⁄8 | 50 | 3⁄8 |
3⁄4 | 6⁄8 | 60 | 1⁄2 |
1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
Company Profile
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
Our Company Certifications
Safe Delivery
Q:Why choose us ?
A. we are a manufacturer, we have manufactured valve for over 20 years .
B. Reliable Quality Assurance System;
C. Cutting-Edge Computer-Controlled CNC Machines;
D. Bespoke Solutions from Highly Experienced Specialists;
E. Customization and OEM Available for Specific Application;
F. Extensive Inventory of Spare Parts and Accessories;
G. Well-Developed CZPT Marketing Network;
H. Efficient After-Sale Service System
Q. what is your payment term?
A: 30% TT deposit, 70% balance T/T before shipping.
Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
Q: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.
Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Standard Or Nonstandard: | Standard |
---|---|
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
Hardness: | Hardened Tooth Surface |
Manufacturing Method: | Cut Gear |
Toothed Portion Shape: | Spur Gear |
Material: | Alloy |
Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by CX 2023-05-16
China Standard Sprockets for Conveyor Chains (1-881-25-30) app sprocket
Solution Description
Regular Sprockets for Conveyor Chains(1-881-twenty five-thirty)
Conveyor Chain Sprockets
one. Content: PA6
2. Enamel: seventeen,19,21,23,twenty five
3.Round bore: 20~40
four. Large precision and matching nicely
Introduction of our firm:
ZheJiang CZPT Chain Co., Ltd. specialized in manufacturing conveyor chains, modular belts, sprockets and conveyor elements. Because 1998 we have been giving items to consumers in Italy, Germany, Spain, and so forth. Now we have enterprise all more than the globe.
Certification:ISO9 Fax:
Code | Tooth No. | PD | OD | Bore/mm |
1-881-17-20 | 17 | 103.seven | 104.seven | 20 |
1-881-17-twenty five | twenty five | |||
1-881-seventeen-30 | thirty | |||
one-881-19-twenty | 19 | 115.seven | 117 | twenty |
1-881-19-twenty five | twenty five | |||
1-881-19-thirty | 30 | |||
one-881-19-35 | 35 | |||
one-881-21-25 | 21 | 127.8 | 129 | 25 |
one-881-21-30 | thirty | |||
one-881-21-35 | 35 | |||
one-881-21-forty | 40 | |||
1-881-23-twenty five | 23 | 139.9 | 140.seven | twenty five |
1-881-23-30 | 30 | |||
one-881-23-35 | 35 | |||
1-881-23-40 | 40 | |||
one-881-twenty five-25 | 25 | 152 | 153 | twenty five |
1-881-twenty five-30 | 30 | |||
one-881-twenty five-35 | 35 | |||
one-881-25-forty | 40 |
Business Type: | Manufacturer |
---|---|
Teeth No.: | 25 |
Mat: | PA6 |
Certification: | ISO9001:2008 |
Brand Name: | Ll |
Place of Origin: | Shanghai, China |
###
Customization: |
Available
|
---|
###
Code | Teeth No. | PD | OD | Bore/mm |
1-881-17-20 | 17 | 103.7 | 104.7 | 20 |
1-881-17-25 | 25 | |||
1-881-17-30 | 30 | |||
1-881-19-20 | 19 | 115.7 | 117 | 20 |
1-881-19-25 | 25 | |||
1-881-19-30 | 30 | |||
1-881-19-35 | 35 | |||
1-881-21-25 | 21 | 127.8 | 129 | 25 |
1-881-21-30 | 30 | |||
1-881-21-35 | 35 | |||
1-881-21-40 | 40 | |||
1-881-23-25 | 23 | 139.9 | 140.7 | 25 |
1-881-23-30 | 30 | |||
1-881-23-35 | 35 | |||
1-881-23-40 | 40 | |||
1-881-25-25 | 25 | 152 | 153 | 25 |
1-881-25-30 | 30 | |||
1-881-25-35 | 35 | |||
1-881-25-40 | 40 |
Business Type: | Manufacturer |
---|---|
Teeth No.: | 25 |
Mat: | PA6 |
Certification: | ISO9001:2008 |
Brand Name: | Ll |
Place of Origin: | Shanghai, China |
###
Customization: |
Available
|
---|
###
Code | Teeth No. | PD | OD | Bore/mm |
1-881-17-20 | 17 | 103.7 | 104.7 | 20 |
1-881-17-25 | 25 | |||
1-881-17-30 | 30 | |||
1-881-19-20 | 19 | 115.7 | 117 | 20 |
1-881-19-25 | 25 | |||
1-881-19-30 | 30 | |||
1-881-19-35 | 35 | |||
1-881-21-25 | 21 | 127.8 | 129 | 25 |
1-881-21-30 | 30 | |||
1-881-21-35 | 35 | |||
1-881-21-40 | 40 | |||
1-881-23-25 | 23 | 139.9 | 140.7 | 25 |
1-881-23-30 | 30 | |||
1-881-23-35 | 35 | |||
1-881-23-40 | 40 | |||
1-881-25-25 | 25 | 152 | 153 | 25 |
1-881-25-30 | 30 | |||
1-881-25-35 | 35 | |||
1-881-25-40 | 40 |
Select sprocket
If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.
Roller sprocket
A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
Roller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.
Flat hole sprocket
Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.
Steel split sprocket
Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.
editor by czh 2022-12-28