Product Description
SPROCKET 1/2” X 5/16” 08B SERIES SPROCKETS
For Chain Acc.to DIN8187 ISO/R 606 | |||||
Tooth Radius r3 | 13.0mm | ||||
Radius Width C | 1.3mm | ||||
Tooth Width b1 | 7.0mm | ||||
Tooth Width B1 | 7.2mm | ||||
Tooth Width B2 | 21.0mm | ||||
Tooth Width B3 | 34.9mm | ||||
08B SERIES ROLLER CHAINS | |||||
Pitch | 12.7 mm | ||||
Internal Width | 7.75 mm | ||||
Roller Diameter | 8.51 mm |
Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
D1 | D2 | D3 | |||
8 | 37.2 | 33.18 | 8 | 10 | 10 |
9 | 41.0 | 37.13 | 8 | 10 | 10 |
10 | 45.2 | 41.10 | 8 | 10 | 10 |
11 | 48.7 | 45.07 | 10 | 10 | 12 |
12 | 53.0 | 49.07 | 10 | 10 | 12 |
13 | 57.4 | 53.06 | 10 | 10 | 12 |
14 | 61.8 | 57.07 | 10 | 10 | 12 |
15 | 65.5 | 61.09 | 10 | 10 | 12 |
16 | 69.5 | 65.10 | 10 | 12 | 16 |
17 | 73.6 | 69.11 | 10 | 12 | 16 |
18 | 77.8 | 73.14 | 10 | 12 | 16 |
19 | 81.7 | 77.16 | 10 | 12 | 16 |
20 | 85.8 | 81.19 | 10 | 12 | 16 |
21 | 89.7 | 85.22 | 12 | 16 | 16 |
22 | 93.8 | 89.24 | 12 | 16 | 16 |
23 | 98.2 | 93.27 | 12 | 16 | 16 |
24 | 101.8 | 97.29 | 12 | 16 | 16 |
25 | 105.8 | 101.33 | 12 | 16 | 16 |
26 | 110.0 | 105.36 | 16 | 16 | 16 |
27 | 114.0 | 109.40 | 16 | 16 | 16 |
28 | 118.0 | 113.42 | 16 | 16 | 16 |
29 | 122.0 | 117.46 | 16 | 16 | 16 |
30 | 126.1 | 121.50 | 16 | 16 | 16 |
31 | 130.2 | 125.54 | 16 | 16 | 20 |
32 | 134.3 | 129.56 | 16 | 16 | 20 |
33 | 138.4 | 133.60 | 16 | 16 | 20 |
34 | 142.6 | 137.64 | 16 | 16 | 20 |
35 | 146.7 | 141.68 | 16 | 16 | 20 |
36 | 151.0 | 145.72 | 16 | 20 | 20 |
37 | 154.6 | 149.76 | 16 | 20 | 20 |
38 | 158.6 | 153.80 | 16 | 20 | 20 |
39 | 162.7 | 157.83 | 16 | 20 | 20 |
40 | 166.8 | 161.87 | 16 | 20 | 20 |
41 | 171.4 | 165.91 | 20 | 20 | 25 |
42 | 175.4 | 169.94 | 20 | 20 | 25 |
43 | 179.7 | 173.98 | 20 | 20 | 25 |
44 | 183.8 | 178.02 | 20 | 20 | 25 |
45 | 188.0 | 182.07 | 20 | 20 | 25 |
46 | 192.1 | 186.10 | 20 | 20 | 25 |
47 | 196.2 | 190.14 | 20 | 20 | 25 |
48 | 200.3 | 194.18 | 20 | 20 | 25 |
49 | 204.3 | 198.22 | 20 | 20 | 25 |
50 | 208.3 | 202.26 | 20 | 20 | 25 |
51 | 212.1 | 206.30 | 20 | 25 | 25 |
52 | 216.1 | 210.34 | 20 | 25 | 25 |
53 | 220.2 | 214.37 | 20 | 25 | 25 |
54 | 224.1 | 218.43 | 20 | 25 | 25 |
55 | 228.1 | 222.46 | 20 | 25 | 25 |
56 | 232.2 | 226.50 | 20 | 25 | 25 |
57 | 236.4 | 230.54 | 20 | 25 | 25 |
58 | 240.5 | 234.58 | 20 | 25 | 25 |
59 | 244.5 | 238.62 | 20 | 25 | 25 |
60 | 248.6 | 242.66 | 20 | 25 | 25 |
62 | 256.9 | 250.74 | 25 | 25 | 25 |
64 | 265.1 | 258.82 | 25 | 25 | 25 |
65 | 269.0 | 262.86 | 25 | 25 | 25 |
66 | 273.0 | 266.91 | 25 | 25 | 25 |
68 | 281.0 | 274.99 | 25 | 25 | 25 |
70 | 289.0 | 283.07 | 25 | 25 | 25 |
72 | 297.2 | 291.15 | 25 | 25 | 25 |
75 | 309.2 | 303.28 | 25 | 25 | 25 |
76 | 313.2 | 307.32 | 25 | 25 | 25 |
78 | 321.4 | 315.40 | 25 | 25 | 25 |
80 | 329.4 | 323.49 | 25 | 25 | 25 |
85 | 349.0 | 343.69 | 25 | 25 | 25 |
90 | 369.9 | 363.90 | 25 | 25 | 25 |
95 | 390.1 | 384.11 | 25 | 25 | 25 |
100 | 410.3 | 404.32 | 25 | 25 | 25 |
110 | 450.7 | 444.74 | 25 | 25 | 25 |
114 | 466.9 | 460.91 | 25 | 25 | 25 |
120 | 491.2 | 485.16 | 25 | 25 | 25 |
125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
Type: |
Simplex, Duplex, Triplex |
Sprocket Model: |
3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″ |
Teeth Number: |
9-100 |
Standard: |
ANSI , JIS, DIN, ISO |
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
Design criterion | ISO DIN ANSI & Customer Drawings |
Application | Industrial transmission equipment |
Package | Wooden Case / Container and pallet, or made-to-order |
Certification: |
ISO9001 SGS |
Quality Inspection: |
Self-check and Final-check |
Sample: |
ODM&OEM, Trial Order Available and Welcome |
Advantage | Quality first, Service first, Competitive price, Fast delivery |
Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
---|---|---|---|---|
25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
---|---|---|---|
1⁄4 | 2⁄8 | 25 | 1⁄8 |
3⁄8 | 3⁄8 | 35 | 3⁄16 |
1⁄2 | 4⁄8 | 41 | 1⁄4 |
1⁄2 | 4⁄8 | 40 | 5⁄16 |
5⁄8 | 5⁄8 | 50 | 3⁄8 |
3⁄4 | 6⁄8 | 60 | 1⁄2 |
1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
Company Profile
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
Our Company Certifications
Safe Delivery
Q:Why choose us ?
A. we are a manufacturer, we have manufactured valve for over 20 years .
B. Reliable Quality Assurance System;
C. Cutting-Edge Computer-Controlled CNC Machines;
D. Bespoke Solutions from Highly Experienced Specialists;
E. Customization and OEM Available for Specific Application;
F. Extensive Inventory of Spare Parts and Accessories;
G. Well-Developed CZPT Marketing Network;
H. Efficient After-Sale Service System
Q. what is your payment term?
A: 30% TT deposit, 70% balance T/T before shipping.
Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
Q: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.
Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Standard Or Nonstandard: | Standard |
---|---|
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
Hardness: | Hardened Tooth Surface |
Manufacturing Method: | Cut Gear |
Toothed Portion Shape: | Spur Gear |
Material: | Alloy |
Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by CX 2023-05-16
China Customized Stainless Steel Sprocket Wheel Kits Motorcycle Chains Conveyor Belt Sprockets with high quality
Merchandise Description
Stainless Steel Roller Chain Sprocket (All Types)
Particulars ABOUT CZPT CHAIN
Product Description
Product Name | Chain Sprockets |
Procedure | Forging, hobbing, precision machining, and so on. |
Certifications | ISO 9001: 2008, GB/T19001-2000IDT, Test Report |
Regular | GB1244-eighty five, DIN8187,8188, OEM, ANSI or DIN |
Surface area Treatment method | Blacken or Galvanized as You Required |
Materials | Stainless metal, carbon steel, aluminum, copper, brass |
Heat Treatment | 45 – fifty five HRC |
Packaging | Plastic bag+paper scenario+wood pallet |
Apps | Creating Material Shops, Equipment, Industrial, etc. |
A lot more Items
Edge
Particulars ABOUT CZPT CHAIN
Exhibition
Certifications
Workshop
Application
Packaging Details & Transport
FAQ
1. Are you a maker or trade Business?
We are a factory founded in 1997 with a trade team for worldwide service.
two. What terms of payment do you normally use?
T/T 30% deposit and 70% from doc, Western Union, L/C at sight
3. What is your direct time for your goods?
Typically 35 days following confirmed order. thirty days could be available in the low year for some products (during May possibly to July), and forty five days for the duration of the new calendar year and scorching period ( Jan to March).
four. Samples
For buyers who want sample confirmation ahead of purchasing, remember to bear in mind that the subsequent coverage will be adopted:
1) All samples are free of charge of cost with a optimum worth not exceeding USD 100.
2) The courier price for the initial-time sample sending will be charged by the consignee. We will send the samples with freight to be collected. So make sure you advise your account with FedEx, UPS, DHL, or TNT so that we can commence promptly.
3) The initial-time courier cost will be totally deducted from the agreement price of the demo cooperation.
US $0.52-14 / Piece | |
1 Piece (Min. Order) |
###
Standard Or Nonstandard: | Standard |
---|---|
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery |
Hardness: | Hardened Tooth Surface |
Manufacturing Method: | Cast Gear |
Toothed Portion Shape: | Spur Gear |
Material: | Stainless Steel |
###
Customization: |
Available
|
---|
###
Product Name | Chain Sprockets |
Process | Forging, hobbing, precision machining, etc. |
Certifications | ISO 9001: 2008, GB/T19001-2000IDT, Test Report |
Standard | GB1244-85, DIN8187,8188, OEM, ANSI or DIN |
Surface Treatment | Blacken or Galvanized as You Required |
Material | Stainless steel, carbon steel, aluminum, copper, brass |
Heat Treatment | 45 – 55 HRC |
Packaging | Plastic bag+paper case+wooden pallet |
Applications | Building Material Shops, Machinery, Industrial, etc. |
US $0.52-14 / Piece | |
1 Piece (Min. Order) |
###
Standard Or Nonstandard: | Standard |
---|---|
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery |
Hardness: | Hardened Tooth Surface |
Manufacturing Method: | Cast Gear |
Toothed Portion Shape: | Spur Gear |
Material: | Stainless Steel |
###
Customization: |
Available
|
---|
###
Product Name | Chain Sprockets |
Process | Forging, hobbing, precision machining, etc. |
Certifications | ISO 9001: 2008, GB/T19001-2000IDT, Test Report |
Standard | GB1244-85, DIN8187,8188, OEM, ANSI or DIN |
Surface Treatment | Blacken or Galvanized as You Required |
Material | Stainless steel, carbon steel, aluminum, copper, brass |
Heat Treatment | 45 – 55 HRC |
Packaging | Plastic bag+paper case+wooden pallet |
Applications | Building Material Shops, Machinery, Industrial, etc. |
How to Use Sprocket for Conversion Optimization
The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
Typical sprocket
Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.
Function
Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
element
Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
Put on
Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.
editor by czh 2023-01-20