Product Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3					sixteen.0mm
Radius Width C					1.6mm
Tooth Width b1					nine.0mm
Tooth Width B1					nine.1mm
Tooth Width B2					25.5mm
Tooth Width B3					42.1mm
10B Series ROLLER CHAINS
Pitch					15.875 mm
Internal Width					nine.sixty five mm
Roller Diameter					ten.sixteen mm

 

 

Z	de	dp	SIMPLEX			DUPLEX			TRIPLEX
			dm	D1	A	dm	D2	A	dm	D3	A
8	forty seven.	forty one.48	twenty five	10	25	twenty five	twelve	forty	twenty five	12	fifty five
nine	fifty two.six	forty six.42	thirty	ten	twenty five	30	12	forty	30	12	55
10	fifty seven.5	fifty one.37	35	ten	twenty five	35	twelve	40	35	12	55
eleven	sixty three.	56.34	37	twelve	thirty	39	fourteen	40	39	sixteen	55
twelve	sixty eight.	61.34	forty two	12	30	forty four	fourteen	forty	44	sixteen	fifty five
thirteen	73.	66.32	forty seven	12	thirty	forty nine	fourteen	forty	forty nine	16	fifty five
fourteen	seventy eight.	seventy one.34	52	12	thirty	fifty four	fourteen	forty	54	16	fifty five
fifteen	83.	seventy six.36	57	12	30	fifty nine	14	forty	59	16	55
16	88.	81.37	sixty	12	30	64	sixteen	forty five	sixty four	sixteen	sixty
seventeen	ninety three.	86.39	60	twelve	30	69	16	45	sixty nine	sixteen	sixty
eighteen	98.three	ninety one.forty two	70	14	30	74	16	45	seventy four	sixteen	sixty
19	103.three	96.forty five	70	14	30	79	sixteen	forty five	seventy nine	16	60
twenty	108.four	a hundred and one.forty nine	seventy five	14	thirty	84	16	45	eighty four	16	sixty
21	113.4	106.52	seventy five	16	thirty	85	16	45	eighty five	20	60
22	118.	111.55	80	sixteen	thirty	90	sixteen	forty five	ninety	20	60
23	123.5	116.fifty eight	eighty	sixteen	thirty	95	sixteen	45	ninety five	20	60
24	128.three	121.sixty two	80	16	thirty	a hundred	16	forty five	100	20	60
twenty five	134.	126.sixty six	80	sixteen	thirty	one hundred and five	sixteen	forty five	a hundred and five	20	60
26	139.	131.70	eighty five	20	35	one hundred ten	20	forty five	a hundred and ten	twenty	sixty
27	a hundred and forty four.	136.75	eighty five	twenty	35	a hundred and ten	twenty	forty five	a hundred and ten	twenty	60
28	148.7	141.seventy eight	ninety	20	35	one hundred fifteen	twenty	45	115	twenty	sixty
29	153.eight	146.eighty three	90	20	35	a hundred and fifteen	20	45	115	20	60
30	158.eight	151.87	ninety	twenty	35	a hundred and twenty	20	forty five	one hundred twenty	twenty	sixty
31	163.nine	156.92	95	20	35	one hundred twenty	twenty	45	one hundred twenty	twenty	60
32	168.9	161.95	ninety five	twenty	35	one hundred twenty	twenty	forty five	120	twenty	60
33	174.5	167.00	95	twenty	35	a hundred and twenty	twenty	forty five	a hundred and twenty	20	60
34	179.	172.05	ninety five	20	35	one hundred twenty	twenty	45	a hundred and twenty	twenty	sixty
35	184.1	177.10	ninety five	20	35	a hundred and twenty	20	45	120	twenty	60
36	189.1	182.15	one hundred	twenty	35	120	20	45	a hundred and twenty	25	60
37	194.2	187.twenty	one hundred	20	35	120	20	forty five	120	25	sixty
38	199.2	192.24	one hundred	twenty	35	120	20	45	one hundred twenty	twenty five	60
39	204.two	197.29	a hundred	twenty	35	a hundred and twenty	twenty	forty five	one hundred twenty	twenty five	60
forty	209.3	202.34	one hundred	twenty	35	a hundred and twenty	20	forty five	one hundred twenty	twenty five	sixty
41	214.eight	207.38	*100	twenty	forty	120	20	50	*a hundred thirty	twenty five	sixty
forty two	2,199	212.43	*100	twenty	forty	120	20	fifty	*one hundred thirty	25	sixty
forty three	224.9	217.48	*100	20	40	120	20	50	*130	25	60
44	230.	222.fifty three	*a hundred	20	forty	120	20	fifty	*130	twenty five	60
45	235.	227.fifty eight	*one hundred	20	40	*one hundred twenty	twenty	50	*130	25	sixty
46	240.1	232.sixty three	*a hundred	twenty	40	*120	20	50	*one hundred thirty	25	60
47	245.one	237.sixty eight	*100	20	40	*a hundred and twenty	20	50	*a hundred thirty	twenty five	sixty
48	250.2	242.73	*100	twenty	40	*120	20	fifty	*a hundred thirty	twenty five	sixty
49	255.two	247.seventy eight	*one hundred	twenty	40	*120	twenty	fifty	*130	25	sixty
fifty	260.3	252.eighty two	*a hundred	20	forty	*a hundred and twenty	twenty	50	*130	25	60
fifty one	265.three	257.87	*100	20	forty	*a hundred and twenty	twenty	50	*a hundred thirty	25	60
52	270.4	262.92	*100	20	40	*a hundred and twenty	twenty	50	*130	25	sixty
53	275.4	267.ninety seven	*a hundred	20	forty	*a hundred and twenty	twenty	fifty	*one hundred thirty	25	sixty
fifty four	280.5	273.03	*100	twenty	forty	*one hundred twenty	20	fifty	*a hundred thirty	twenty five	sixty
55	285.five	278.08	*one hundred	20	forty	*120	twenty	50	*one hundred thirty	25	sixty
fifty six	290.6	283.thirteen	*100	20	forty	*a hundred and twenty	twenty	50	*a hundred thirty	twenty five	sixty
57	296.	288.eighteen	*one hundred	20	40	*one hundred twenty	twenty	fifty	*130	25	60
58	300.seven	293.23	*one hundred	twenty	43	*one hundred twenty	20	fifty seven	*130	twenty five	64
fifty nine	305.7	298.28	*one hundred	twenty	forty three	*one hundred twenty	twenty	57	*130	25	64
60	310.8	303.33	*one hundred	20	forty three	*a hundred and twenty	20	57	*one hundred thirty	25	64
sixty two	321.four	313.43	*a hundred	twenty	forty three	*120	20	fifty seven	*a hundred thirty	25	sixty four
64	331.5	323.fifty three	*a hundred	20	forty three	*a hundred and twenty	twenty	57	*130	twenty five	67
sixty five	336.five	328.fifty eight	*a hundred	20	43	*a hundred and twenty	twenty	57	*130	twenty five	67
66	341.6	333.64	*a hundred	twenty	forty three	*a hundred and twenty	twenty	57	*130	25	sixty seven
68	351.7	343.seventy four	*100	twenty	forty three	*a hundred and twenty	twenty	fifty seven	*130	25	sixty seven
70	361.eight	353.84	*one hundred	20	43	*a hundred and twenty	twenty	fifty seven	*one hundred thirty	twenty five	67
seventy two	371.9	363.ninety four	*100	20	43	*a hundred and twenty	20	57	*one hundred thirty	twenty five	sixty seven
seventy five	387.1	379.ten	*one hundred	twenty	forty three	*one hundred twenty	twenty	fifty seven	*130	25	67
seventy six	392.one	384.15	*one hundred	twenty	forty three	*a hundred and twenty	20	fifty seven	*a hundred thirty	25	sixty seven
seventy eight	402.two	394.twenty five	*one hundred	twenty	forty three	*120	20	57	*130	twenty five	67
eighty	412.three	404.36	*100	20	43	*one hundred thirty	twenty	57	*130	25	67
eighty five	437.six	429.62	*one hundred	20	50	*a hundred thirty	twenty	58	*one hundred thirty	25	sixty seven
ninety	462.8	454.88	*one hundred	20	50	*a hundred thirty	twenty	fifty eight	*a hundred thirty	25	67
95	488.5	480.14	*one hundred	20	50	*130	twenty	fifty eight	*one hundred thirty	twenty five	67
100	513.four	505.forty	*a hundred	20	fifty	*one hundred thirty	20	fifty eight	*one hundred thirty	twenty five	67
one hundred ten	563.9	555.92	*100	20	50	*one hundred thirty	twenty	fifty eight	*a hundred thirty	25	67
114	584.1	576.thirteen	*100	twenty	50	*one hundred thirty	20	fifty eight	*a hundred thirty	twenty five	sixty seven
a hundred and twenty	614.4	606.forty five	*100	twenty	fifty	*one hundred thirty	twenty	fifty eight	*130	twenty five	sixty seven
125	639.7	631.fifty one	*a hundred	20	fifty	*130	twenty	58	*130	25	sixty seven

Recognize: *welding hub

Basic Information.
 

Product name	DIN ISO Common CZPT for Roller Chain
Materials Available	one. Stainless Steel: SS304, SS316, etc
	two. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, and so forth
	3. CZPT  according to your request
Surface Therapy	Heat therapy, Quenching therapy, CZPT frequency normalizing treatment, Polishing, CZPT ctrophoresis paint processing, Anodic oxidation treatment, and so on
Characteristic	Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so on
Style criterion	ISO DIN ANSI & CZPT er Drawings
Measurement	Buyer Drawings & ISO standard
Application	Industrial transmission equipment
Deal	Wooden Scenario / Container and pallet, or CZPT
Certification	ISO9001: 2008
Benefit	Good quality 1st, Provider 1st, Competitive value, CZPT shipping and delivery
Shipping and delivery Time	20 days for samples. 45 days for official order.

Installation AND Using

The chain  spoket, as a drive or deflection for chains, has pockets to keep the chain links with a D-profile cross area with flat facet surfaces  parallel to the centre airplane of the chain backlinks, and outer surfaces at proper angles to the chain url centre aircraft. The chain backlinks are pressed firmly in opposition to the outer surfaces and every of the facet surfaces by the angled laying surfaces at the base of the pockets, and also the assist surfaces of the wheel human body collectively with the end sides of the webs shaped by the major and trailing partitions of the pocket.

Notice

When fitting new chainwheels it is very important that a new chain is fitted at the exact same time, and vice versa. Making use of an aged chain with new sprockets, or a new chain with previous sprockets will cause speedy use.

It is important if you are installing the chainwheels your self to have the factory provider guide particular to your design. Our chainwheels are created to be a immediate replacement for your CZPT chainwheels and as this kind of, the set up need to be executed according to your models service handbook.

For the duration of use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched more than the earlier mentioned maximum allowance leads to the chain to experience up the enamel of the sprocket. This leads to harm to the tips of the chainwheels tooth, as the drive transmitted by the chain is transmitted totally via the best of the tooth, fairly than the complete tooth. This results in significant donning of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements organizations (such as ANSI and ISO) preserve expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Table exhibits information from ANSI regular B29.1-2011 (Precision CZPT Transmission Roller Chains, Attachments, and CZPT s) produced by the CZPT ican Culture of CZPT Engineers (ASME). See the references^[8][9][10] for added data.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile CZPT Measuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Measurement	Pitch	Highest Roller Diameter	Minimum Ultimate Tensile CZPT	Measuring Load
twenty five	.250 in (6.35 mm)	.a hundred thirty in (3.30 mm)	780 lb (350 kg)	eighteen lb (8.2 kg)
35	.375 in (9.53 mm)	.200 in (5.08 mm)	1,760 lb (800 kg)	eighteen lb (8.2 kg)
forty one	.500 in (twelve.70 mm)	.306 in (7.77 mm)	one,500 lb (680 kg)	18 lb (8.2 kg)
40	.five hundred in (twelve.70 mm)	.312 in (7.ninety two mm)	three,one hundred twenty five lb (1,417 kg)	31 lb (14 kg)
50	.625 in (15.88 mm)	.400 in (10.16 mm)	4,880 lb (2,210 kg)	forty nine lb (22 kg)
60	.750 in (19.05 mm)	.469 in (11.ninety one mm)	seven,030 lb (3,one hundred ninety kg)	70 lb (32 kg)
eighty	1.000 in (twenty five.forty mm)	.625 in (fifteen.88 mm)	12,five hundred lb (5,seven hundred kg)	a hundred twenty five lb (fifty seven kg)
a hundred	1.250 in (31.75 mm)	.750 in (19.05 mm)	19,531 lb (8,859 kg)	195 lb (88 kg)
a hundred and twenty	1.five hundred in (38.ten mm)	.875 in (22.23 mm)	28,one hundred twenty five lb (twelve,757 kg)	281 lb (127 kg)
one hundred forty	one.750 in (44.45 mm)	one.000 in (twenty five.forty mm)	38,280 lb (17,360 kg)	383 lb (174 kg)
160	2.000 in (50.eighty mm)	one.a hundred twenty five in (28.58 mm)	fifty,000 lb (23,000 kg)	five hundred lb (230 kg)
one hundred eighty	2.250 in (fifty seven.fifteen mm)	1.460 in (37.08 mm)	sixty three,280 lb (28,seven-hundred kg)	633 lb (287 kg)
200	2.five hundred in (63.fifty mm)	1.562 in (39.67 mm)	seventy eight,175 lb (35,460 kg)	781 lb (354 kg)
240	3.000 in (seventy six.twenty mm)	1.875 in (forty seven.sixty three mm)	112,five hundred lb (fifty one,000 kg)	one,000 lb (450 kg

For mnemonic reasons, underneath is one more presentation of important proportions from the same common, expressed in fractions of an inch (which was component of the pondering guiding the selection of chosen numbers in the ANSI common):

Pitch (inches)	Pitch expressed in eighths	ANSI regular chain variety	Width (inches)
one⁄four	two⁄8	twofive	1⁄eight
three⁄eight	three⁄8	3five	3⁄16
one⁄two	4⁄eight	4one	one⁄four
one⁄2	four⁄eight	4	five⁄16
5⁄eight	five⁄eight	five	3⁄8
three⁄four	6⁄eight	six	one⁄two
one	8⁄8	8	five⁄eight

Notes:
one. The pitch is the distance among roller facilities. The width is the distance in between the link plates (i.e. somewhat more than the roller width to enable for clearance).
two. The correct-hand digit of the common denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the variety of eighths of an inch that make up the pitch.
4. An “H” pursuing the standard number denotes heavyweight chain. A hyphenated number pursuing the normal amount denotes double-strand (2), triple-strand (3), and so on. Therefore 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A normal bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not have an effect on the load capability. The much more sprockets at the rear wheel (historically 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the variety of speeds they are designed to operate with, for illustration, “ten speed chain”. Hub gear or solitary speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Normally chains with parallel formed hyperlinks have an even number of links, with every narrow link adopted by a broad a single. Chains constructed up with a uniform kind of link, narrow at one and broad at the other finish, can be manufactured with an odd variety of backlinks, which can be an gain to adapt to a special chainwheel-length on the other facet this kind of a chain tends to be not so strong.

Roller chains manufactured using ISO normal are often referred to as as isochains.

 

WHY Pick US 

one. CZPT ble High quality Assurance Program
2. Reducing-Edge Computer-Controlled CNC CZPT s
three. Bespoke Options from CZPT ly Experienced Experts
four. CZPT ization and CZPT Offered for Distinct Application
5. Comprehensive Stock of CZPT Parts and Accessories
six. Well-Created Throughout the world Advertising Community
seven. Successful Right after-Sale Support Method

 

The 219 sets of CZPT d computerized manufacturing tools give assures for large solution high quality. The 167 engineers and technicians with senior expert titles can design and style and develop products to satisfy the precise needs of CZPT ers, and CZPT CZPT izations are also CZPT with us. Our sound international service community can supply CZPT ers with timely soon after-product sales technical solutions.

We are not just a maker and provider, but also an sector advisor. We function professional-actively with you to provide professional tips and item recommendations in purchase to finish up with a most price effective solution CZPT for your distinct application. The consumers we serve CZPT assortment from conclude consumers to distributors and CZPT s. Our CZPT replacements can be substituted wherever necessary and appropriate for both fix and new assemblies.

 

 

Bushing Sprockets: Bushing sprockets can simplify chain system servicing by changing only worn sprocket assemblies, even though the bushings can nonetheless be reused. The bushing also has a tightly tapered mating area that can transmit larger torques than basic essential components. Shut-fitting surfaces give much better overall performance in purposes with large begin/end functions or shock loads.