Tag Archives: transmission gearbox

China Best Sales Transmission Belt Gearbox Conveyor Parts Driving Chains Stainless Steel Sprocket for Roller Chain & Agriculture Chain & Food Machinery chain sprocket price

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

Company Profile

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

Our Company Certifications

Safe Delivery

Q:Why choose us ?
A. we are a manufacturer, we have manufactured valve for over 20 years .
B. Reliable Quality Assurance System;
C. Cutting-Edge Computer-Controlled CNC Machines;
D. Bespoke Solutions from Highly Experienced Specialists;
E. Customization and OEM Available for Specific Application;
F. Extensive Inventory of Spare Parts and Accessories;
G. Well-Developed CZPT Marketing Network;
H. Efficient After-Sale Service System

Q. what is your payment term? 
 A: 30% TT deposit, 70% balance T/T before shipping.

Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.

Q: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

 
 Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,
 
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
 
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

Choosing the Right Chain Sprocket For Your Bike

When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.

Roller chain sprocket

A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.

Gap-tooth sprocket

A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
sprocket

Steel split sprocket

Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
sprocket

Double-duty sprocket

If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.

China Best Sales Transmission Belt Gearbox Conveyor Parts Driving Chains Stainless Steel Sprocket for Roller Chain & Agriculture Chain & Food Machinery     chain sprocket priceChina Best Sales Transmission Belt Gearbox Conveyor Parts Driving Chains Stainless Steel Sprocket for Roller Chain & Agriculture Chain & Food Machinery     chain sprocket price
editor by CX 2023-05-16

China Automated Transmission Lines Transmission Belt Gearbox Parts Professional Industrial Custom Made Advanced Heat Treatment Stainless Steel Chain Sprocket hp sprocket

Merchandise Description

SPROCKET  1/2” X 5/16”  08B Series SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 thirteen.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B Collection ROLLER CHAINS  
Pitch twelve.7 mm
Internal Width seven.seventy five mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
eight 37.2  33.18  eight ten 10
9 forty one.0  37.13  8 ten ten
10 forty five.2  forty one.10  eight ten ten
eleven forty eight.7  forty five.07  10 10 twelve
twelve 53.0  forty nine.07  ten 10 12
thirteen fifty seven.4  fifty three.06  ten ten twelve
14 sixty one.8  fifty seven.07  10 10 twelve
fifteen 65.5  61.09  ten 10 12
sixteen 69.5  sixty five.10  ten twelve 16
17 73.6  69.11  ten 12 sixteen
18 seventy seven.8  73.14  10 12 16
19 eighty one.7  seventy seven.16  ten twelve 16
20 85.8  81.19  ten 12 16
21 89.7  eighty five.22  twelve 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  twelve 16 sixteen
24 a hundred and one.8  ninety seven.29  twelve sixteen 16
twenty five a hundred and five.8  one hundred and one.33  twelve sixteen 16
26 a hundred and ten.0  105.36  sixteen 16 16
27 114.0  109.40  16 sixteen sixteen
28 118.0  113.42  sixteen sixteen 16
29 122.0  117.46  16 sixteen 16
30 126.1  121.50  16 16 16
31 130.2  a hundred twenty five.54  sixteen 16 20
32 134.3  129.56  16 sixteen 20
33 138.4  133.60  sixteen 16 twenty
34 142.6  137.64  sixteen sixteen 20
35 146.7  141.68  sixteen 16 20
36 151.0  145.72  sixteen twenty twenty
37 154.6  149.76  sixteen twenty twenty
38 158.6  153.80  sixteen twenty twenty
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  one hundred sixty five.91  twenty twenty 25
forty two a hundred seventy five.4  169.94  20 twenty 25
43 179.7  173.98  twenty twenty twenty five
forty four 183.8  178.02  20 20 twenty five
45 188.0  182.07  twenty twenty 25
46 192.1  186.10  twenty 20 twenty five
47 196.2  one hundred ninety.14  twenty 20 twenty five
48 200.3  194.18  20 20 25
49 204.3  198.22  twenty 20 twenty five
50 208.3  202.26  twenty 20 25
51 212.1  206.30  20 twenty five twenty five
fifty two 216.1  210.34  20 twenty five 25
fifty three 220.2  214.37  20 25 twenty five
fifty four 224.1  218.43  20 25 twenty five
55 228.1  222.46  twenty 25 25
56 232.2  226.50  20 twenty five 25
57 236.4  230.54  twenty 25 25
58 240.5  234.58  twenty 25 twenty five
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 twenty five 25
sixty four 265.1  258.82  twenty five 25 25
sixty five 269.0  262.86  twenty five 25 25
66 273.0  266.91  twenty five 25 25
68 281.0  274.99  twenty five twenty five twenty five
70 289.0  283.07  twenty five 25 25
seventy two 297.2  291.15  25 twenty five 25
75 309.2  303.28  twenty five 25 twenty five
seventy six 313.2  307.32  25 twenty five twenty five
78 321.4  315.40  25 twenty five 25
eighty 329.4  323.49  25 25 25
eighty five 349.0  343.69  twenty five twenty five twenty five
ninety 369.9  363.90  twenty five twenty five twenty five
95 390.1  384.11  25 twenty five 25
one hundred 410.3  404.32  25 25 25
one hundred ten 450.7  444.74  twenty five 25 twenty five
114 466.9  460.91  25 twenty five twenty five
a hundred and twenty 491.2  485.16  25 twenty five twenty five
one hundred twenty five 511.3  505.37  25 25 25

Simple Data.

Variety:

Simplex, Duplex, Triplex

Sprocket Model:

three/8″,1/2″,5/8″,3/4″,1″,1.25″,1.fifty”,1.75″,2.00″,2.25″,2.00″,2.twenty five”,2.fifty”, 3″

Enamel Variety:

nine-a hundred

Common:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316  As For every Consumer Request.

Overall performance Treatment:

Carburizing, High Frequency Remedy, Hardening and Tempering, Nitriding

Floor Remedy:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Design criterion ISO DIN ANSI & Customer Drawings
Software Industrial transmission products
Package Wood Circumstance / Container and pallet, or produced-to-order

Certification:

ISO9001 SGS

Good quality Inspection:

Self-check and Closing-examine

Sample:

ODM&OEM, Trial Purchase Available and Welcome

Benefit Good quality initial, Support first, Competitive cost, Quick supply
Shipping and delivery Time ten days for samples. 15 days for official order.

 

Installation AND Utilizing

The chain spocket, as a generate or deflection for chains, has pockets to hold the chain hyperlinks with a D-profile cross section with flat facet surfaces  parallel to the centre aircraft of the chain backlinks, and outer surfaces at proper angles to the chain url centre airplane. The chain hyperlinks are pressed firmly in opposition to the outer surfaces and every of the side surfaces by the angled laying surfaces at the foundation of the pockets, and also the help surfaces of the wheel body together with the finish sides of the webs shaped by the top and trailing partitions of the pocket.

Notice

When fitting new chainwheels it is quite crucial that a new chain is fitted at the same time, and vice versa. Using an previous chain with new sprockets, or a new chain with aged sprockets will trigger rapid use.

It is critical if you are setting up the chainwheels your self to have the manufacturing facility support manual specific to your design. Our chainwheels are made to be a direct substitute for your OEM chainwheels and as this kind of, the installation ought to be performed according to your designs service handbook.

For the duration of use a chain will extend (i.e. the pins will use creating extension of the chain). Utilizing a chain which has been stretched far more than the earlier mentioned optimum allowance brings about the chain to ride up the enamel of the sprocket. This triggers hurt to the suggestions of the chainwheels enamel, as the power transmitted by the chain is transmitted fully by means of the prime of the tooth, instead than the entire tooth. This benefits in significant sporting of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements businesses (such as ANSI and ISO) preserve requirements for style, proportions, and interchangeability of transmission chains. For illustration, the pursuing Desk demonstrates knowledge from ANSI normal B29.1-2011 (Precision Electrical power Transmission Roller Chains, Attachments, and Sprockets) produced by the American Modern society of Mechanical Engineers (ASME). See the references[8][9][10] for extra info.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Dimensions
Size Pitch Highest Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
twenty five .250 in (6.35 mm) .a hundred thirty in (3.thirty mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 .375 in (9.53 mm) .200 in (5.08 mm) one,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .500 in (twelve.70 mm) .306 in (7.seventy seven mm) 1,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.ninety two mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 .625 in (15.88 mm) .400 in (ten.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
sixty .750 in (19.05 mm) .469 in (11.91 mm) seven,030 lb (3,a hundred ninety kg) 70 lb (32 kg)
80 one.000 in (25.forty mm) .625 in (15.88 mm) twelve,500 lb (5,seven hundred kg) 125 lb (57 kg)
a hundred one.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty one.500 in (38.10 mm) .875 in (22.23 mm) 28,a hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty 1.750 in (forty four.45 mm) 1.000 in (25.forty mm) 38,280 lb (seventeen,360 kg) 383 lb (174 kg)
a hundred and sixty two.000 in (fifty.eighty mm) one.125 in (28.fifty eight mm) fifty,000 lb (23,000 kg) 500 lb (230 kg)
a hundred and eighty 2.250 in (fifty seven.15 mm) one.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.five hundred in (sixty three.50 mm) 1.562 in (39.67 mm) seventy eight,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (76.twenty mm) 1.875 in (forty seven.63 mm) 112,500 lb (fifty one,000 kg) one,000 lb (450 kg

For mnemonic reasons, below is yet another presentation of key dimensions from the exact same regular, expressed in fractions of an inch (which was part of the considering powering the selection of chosen numbers in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain variety
Width (inches)
one4 two8 two5 1eight
threeeight 38 3five threesixteen
onetwo four8 fourone 14
onetwo 48 4 5sixteen
58 five8 five 3eight
three4 68 six one2
one 88 eight fiveeight

Notes:
1. The pitch is the distance in between roller centers. The width is the length between the website link plates (i.e. slightly a lot more than the roller width to allow for clearance).
2. The appropriate-hand digit of the regular denotes 0 = normal chain, 1 = light-weight chain, 5 = rollerless bushing chain.
3. The remaining-hand digit denotes the quantity of eighths of an inch that make up the pitch.
four. An “H” following the common variety denotes heavyweight chain. A hyphenated number adhering to the normal variety denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes amount 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The a lot more sprockets at the rear wheel (traditionally 3-6, today 7-twelve sprockets), the narrower the chain. Chains are marketed in accordance to the quantity of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or solitary pace bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the highest thickness of a sprocket that can be utilised with the chain.

Generally chains with parallel shaped back links have an even amount of links, with each and every slim website link followed by a broad 1. Chains constructed up with a uniform sort of hyperlink, slim at 1 and broad at the other stop, can be manufactured with an odd quantity of links, which can be an advantage to adapt to a special chainwheel-distance on the other facet this kind of a chain tends to be not so sturdy.

Roller chains made employing ISO standard are sometimes known as as isochains.

 

WHY Pick US 
 

1. Dependable High quality Assurance System
2. Chopping-Edge Personal computer-Managed CNC Devices
3. Bespoke Options from Highly Knowledgeable Professionals
four. Customization and OEM Offered for Particular Application
five. Substantial Stock of Spare Elements and Accessories
six. Well-Created Worldwide Advertising Network
seven. Productive After-Sale Provider Program

 

The 219 sets of innovative automated generation tools give ensures for large solution high quality. The 167 engineers and experts with senior professional titles can layout and create products to satisfy the exact demands of consumers, and OEM customizations are also offered with us. Our sound international service community can provide consumers with well timed right after-product sales complex providers.

We are not just a manufacturer and provider, but also an industry specialist. We operate pro-actively with you to offer you specialist suggestions and solution recommendations in buy to end up with a most price powerful merchandise available for your certain application. The consumers we serve throughout the world assortment from conclude users to distributors and OEMs. Our OEM replacements can be substituted anywhere essential and ideal for the two fix and new assemblies.

 

US $0.3-1
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58
US $0.3-1
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
sprocket

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Automated Transmission Lines Transmission Belt Gearbox Parts Professional Industrial Custom Made Advanced Heat Treatment Stainless Steel Chain Sprocket     hp sprocketChina Automated Transmission Lines Transmission Belt Gearbox Parts Professional Industrial Custom Made Advanced Heat Treatment Stainless Steel Chain Sprocket     hp sprocket
editor by czh 2023-01-31

China Gearbox Belt Mining Machinery Parts Transmission Conveyor Roller Chains 10b 48 Teeth Hub Sprocket with ce certificate top quality Good price

Product Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 sixteen.0mm
Radius Width C 1.6mm
Tooth Width b1 nine.0mm
Tooth Width B1 nine.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B Series ROLLER CHAINS  
Pitch 15.875 mm
Internal Width nine.sixty five mm
Roller Diameter ten.sixteen mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 forty seven. forty one.48 twenty five 10 25 twenty five twelve forty twenty five 12 fifty five
nine fifty two.six forty six.42 thirty ten twenty five 30 12 forty 30 12 55
10 fifty seven.5 fifty one.37 35 ten twenty five 35 twelve 40 35 12 55
eleven sixty three. 56.34 37 twelve thirty 39 fourteen 40 39 sixteen 55
twelve sixty eight. 61.34 forty two 12 30 forty four fourteen forty 44 sixteen fifty five
thirteen 73. 66.32 forty seven 12 thirty forty nine fourteen forty forty nine 16 fifty five
fourteen seventy eight. seventy one.34 52 12 thirty fifty four fourteen forty 54 16 fifty five
fifteen 83. seventy six.36 57 12 30 fifty nine 14 forty 59 16 55
16 88. 81.37 sixty 12 30 64 sixteen forty five sixty four sixteen sixty
seventeen ninety three. 86.39 60 twelve 30 69 16 45 sixty nine sixteen sixty
eighteen 98.three ninety one.forty two 70 14 30 74 16 45 seventy four sixteen sixty
19 103.three 96.forty five 70 14 30 79 sixteen forty five seventy nine 16 60
twenty 108.four a hundred and one.forty nine seventy five 14 thirty 84 16 45 eighty four 16 sixty
21 113.4 106.52 seventy five 16 thirty 85 16 45 eighty five 20 60
22 118. 111.55 80 sixteen thirty 90 sixteen forty five ninety 20 60
23 123.5 116.fifty eight eighty sixteen thirty 95 sixteen 45 ninety five 20 60
24 128.three 121.sixty two 80 16 thirty a hundred 16 forty five 100 20 60
twenty five 134. 126.sixty six 80 sixteen thirty one hundred and five sixteen forty five a hundred and five 20 60
26 139. 131.70 eighty five 20 35 one hundred ten 20 forty five a hundred and ten twenty sixty
27 a hundred and forty four. 136.75 eighty five twenty 35 a hundred and ten twenty forty five a hundred and ten twenty 60
28 148.7 141.seventy eight ninety 20 35 one hundred fifteen twenty 45 115 twenty sixty
29 153.eight 146.eighty three 90 20 35 a hundred and fifteen 20 45 115 20 60
30 158.eight 151.87 ninety twenty 35 a hundred and twenty 20 forty five one hundred twenty twenty sixty
31 163.nine 156.92 95 20 35 one hundred twenty twenty 45 one hundred twenty twenty 60
32 168.9 161.95 ninety five twenty 35 one hundred twenty twenty forty five 120 twenty 60
33 174.5 167.00 95 twenty 35 a hundred and twenty twenty forty five a hundred and twenty 20 60
34 179. 172.05 ninety five 20 35 one hundred twenty twenty 45 a hundred and twenty twenty sixty
35 184.1 177.10 ninety five 20 35 a hundred and twenty 20 45 120 twenty 60
36 189.1 182.15 one hundred twenty 35 120 20 45 a hundred and twenty 25 60
37 194.2 187.twenty one hundred 20 35 120 20 forty five 120 25 sixty
38 199.2 192.24 one hundred twenty 35 120 20 45 one hundred twenty twenty five 60
39 204.two 197.29 a hundred twenty 35 a hundred and twenty twenty forty five one hundred twenty twenty five 60
forty 209.3 202.34 one hundred twenty 35 a hundred and twenty 20 forty five one hundred twenty twenty five sixty
41 214.eight 207.38 *100 twenty forty 120 20 50 *a hundred thirty twenty five sixty
forty two 2,199 212.43 *100 twenty forty 120 20 fifty *one hundred thirty 25 sixty
forty three 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230. 222.fifty three *a hundred 20 forty 120 20 fifty *130 twenty five 60
45 235. 227.fifty eight *one hundred 20 40 *one hundred twenty twenty 50 *130 25 sixty
46 240.1 232.sixty three *a hundred twenty 40 *120 20 50 *one hundred thirty 25 60
47 245.one 237.sixty eight *100 20 40 *a hundred and twenty 20 50 *a hundred thirty twenty five sixty
48 250.2 242.73 *100 twenty 40 *120 20 fifty *a hundred thirty twenty five sixty
49 255.two 247.seventy eight *one hundred twenty 40 *120 twenty fifty *130 25 sixty
fifty 260.3 252.eighty two *a hundred 20 forty *a hundred and twenty twenty 50 *130 25 60
fifty one 265.three 257.87 *100 20 forty *a hundred and twenty twenty 50 *a hundred thirty 25 60
52 270.4 262.92 *100 20 40 *a hundred and twenty twenty 50 *130 25 sixty
53 275.4 267.ninety seven *a hundred 20 forty *a hundred and twenty twenty fifty *one hundred thirty 25 sixty
fifty four 280.5 273.03 *100 twenty forty *one hundred twenty 20 fifty *a hundred thirty twenty five sixty
55 285.five 278.08 *one hundred 20 forty *120 twenty 50 *one hundred thirty 25 sixty
fifty six 290.6 283.thirteen *100 20 forty *a hundred and twenty twenty 50 *a hundred thirty twenty five sixty
57 296. 288.eighteen *one hundred 20 40 *one hundred twenty twenty fifty *130 25 60
58 300.seven 293.23 *one hundred twenty 43 *one hundred twenty 20 fifty seven *130 twenty five 64
fifty nine 305.7 298.28 *one hundred twenty forty three *one hundred twenty twenty 57 *130 25 64
60 310.8 303.33 *one hundred 20 forty three *a hundred and twenty 20 57 *one hundred thirty 25 64
sixty two 321.four 313.43 *a hundred twenty forty three *120 20 fifty seven *a hundred thirty 25 sixty four
64 331.5 323.fifty three *a hundred 20 forty three *a hundred and twenty twenty 57 *130 twenty five 67
sixty five 336.five 328.fifty eight *a hundred 20 43 *a hundred and twenty twenty 57 *130 twenty five 67
66 341.6 333.64 *a hundred twenty forty three *a hundred and twenty twenty 57 *130 25 sixty seven
68 351.7 343.seventy four *100 twenty forty three *a hundred and twenty twenty fifty seven *130 25 sixty seven
70 361.eight 353.84 *one hundred 20 43 *a hundred and twenty twenty fifty seven *one hundred thirty twenty five 67
seventy two 371.9 363.ninety four *100 20 43 *a hundred and twenty 20 57 *one hundred thirty twenty five sixty seven
seventy five 387.1 379.ten *one hundred twenty forty three *one hundred twenty twenty fifty seven *130 25 67
seventy six 392.one 384.15 *one hundred twenty forty three *a hundred and twenty 20 fifty seven *a hundred thirty 25 sixty seven
seventy eight 402.two 394.twenty five *one hundred twenty forty three *120 20 57 *130 twenty five 67
eighty 412.three 404.36 *100 20 43 *one hundred thirty twenty 57 *130 25 67
eighty five 437.six 429.62 *one hundred 20 50 *a hundred thirty twenty 58 *one hundred thirty 25 sixty seven
ninety 462.8 454.88 *one hundred 20 50 *a hundred thirty twenty fifty eight *a hundred thirty 25 67
95 488.5 480.14 *one hundred 20 50 *130 twenty fifty eight *one hundred thirty twenty five 67
100 513.four 505.forty *a hundred 20 fifty *one hundred thirty 20 fifty eight *one hundred thirty twenty five 67
one hundred ten 563.9 555.92 *100 20 50 *one hundred thirty twenty fifty eight *a hundred thirty 25 67
114 584.1 576.thirteen *100 twenty 50 *one hundred thirty 20 fifty eight *a hundred thirty twenty five sixty seven
a hundred and twenty 614.4 606.forty five *100 twenty fifty *one hundred thirty twenty fifty eight *130 twenty five sixty seven
125 639.7 631.fifty one *a hundred 20 fifty *130 twenty 58 *130 25 sixty seven

Recognize: *welding hub

Basic Information.
 

Product name  DIN ISO Common CZPT for Roller Chain
Materials Available  one. Stainless Steel: SS304, SS316, etc
two. Alloy Metal: C45, 45Mn, 42CrMo, 20CrMo, and so forth
3. CZPT  according to your request
Surface Therapy Heat therapy, Quenching therapy, CZPT frequency normalizing treatment, Polishing, CZPT ctrophoresis paint processing, Anodic oxidation treatment, and so on
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so on
Style criterion ISO DIN ANSI & CZPT er Drawings
Measurement Buyer Drawings & ISO standard 
Application Industrial transmission equipment
Deal Wooden Scenario / Container and pallet, or CZPT
Certification ISO9001: 2008 
Benefit Good quality 1st, Provider 1st, Competitive value, CZPT shipping and delivery
Shipping and delivery Time 20 days for samples. 45 days for official order.

Installation AND Using

The chain  spoket, as a drive or deflection for chains, has pockets to keep the chain links with a D-profile cross area with flat facet surfaces  parallel to the centre airplane of the chain backlinks, and outer surfaces at proper angles to the chain url centre aircraft. The chain backlinks are pressed firmly in opposition to the outer surfaces and every of the facet surfaces by the angled laying surfaces at the base of the pockets, and also the assist surfaces of the wheel human body collectively with the end sides of the webs shaped by the major and trailing partitions of the pocket.

Notice

When fitting new chainwheels it is very important that a new chain is fitted at the exact same time, and vice versa. Making use of an aged chain with new sprockets, or a new chain with previous sprockets will cause speedy use.

It is important if you are installing the chainwheels your self to have the factory provider guide particular to your design. Our chainwheels are created to be a immediate replacement for your CZPT chainwheels and as this kind of, the set up need to be executed according to your models service handbook.

For the duration of use a chain will stretch (i.e. the pins will put on creating extension of the chain). Employing a chain which has been stretched more than the earlier mentioned maximum allowance leads to the chain to experience up the enamel of the sprocket. This leads to harm to the tips of the chainwheels tooth, as the drive transmitted by the chain is transmitted totally via the best of the tooth, fairly than the complete tooth. This results in significant donning of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements organizations (such as ANSI and ISO) preserve expectations for design, proportions, and interchangeability of transmission chains. For illustration, the following Table exhibits information from ANSI regular B29.1-2011 (Precision CZPT Transmission Roller Chains, Attachments, and CZPT s) produced by the CZPT ican Culture of CZPT Engineers (ASME). See the references[8][9][10] for added data.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile CZPT Measuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Measurement Pitch Highest Roller Diameter Minimum Ultimate Tensile CZPT Measuring Load
twenty five .250 in (6.35 mm) .a hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.53 mm) .200 in (5.08 mm) 1,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .500 in (twelve.70 mm) .306 in (7.77 mm) one,500 lb (680 kg) 18 lb (8.2 kg)
40 .five hundred in (twelve.70 mm) .312 in (7.ninety two mm) three,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
50 .625 in (15.88 mm) .400 in (10.16 mm) 4,880 lb (2,210 kg) forty nine lb (22 kg)
60 .750 in (19.05 mm) .469 in (11.ninety one mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
eighty 1.000 in (twenty five.forty mm) .625 in (fifteen.88 mm) 12,five hundred lb (5,seven hundred kg) a hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
a hundred and twenty 1.five hundred in (38.ten mm) .875 in (22.23 mm) 28,one hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
one hundred forty one.750 in (44.45 mm) one.000 in (twenty five.forty mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.eighty mm) one.a hundred twenty five in (28.58 mm) fifty,000 lb (23,000 kg) five hundred lb (230 kg)
one hundred eighty 2.250 in (fifty seven.fifteen mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven-hundred kg) 633 lb (287 kg)
200 2.five hundred in (63.fifty mm) 1.562 in (39.67 mm) seventy eight,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.twenty mm) 1.875 in (forty seven.sixty three mm) 112,five hundred lb (fifty one,000 kg) one,000 lb (450 kg

For mnemonic reasons, underneath is one more presentation of important proportions from the same common, expressed in fractions of an inch (which was component of the pondering guiding the selection of chosen numbers in the ANSI common):

Pitch (inches) Pitch expressed
in eighths
ANSI regular
chain variety
Width (inches)
onefour two8 twofive 1eight
threeeight three8 3five 316
onetwo 4eight 4one onefour
one2 foureight 4 five16
5eight fiveeight five 38
threefour 6eight six onetwo
one 88 8 fiveeight

Notes:
one. The pitch is the distance among roller facilities. The width is the distance in between the link plates (i.e. somewhat more than the roller width to enable for clearance).
two. The correct-hand digit of the common denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the variety of eighths of an inch that make up the pitch.
4. An “H” pursuing the standard number denotes heavyweight chain. A hyphenated number pursuing the normal amount denotes double-strand (2), triple-strand (3), and so on. Therefore 60H-3 denotes quantity 60 heavyweight triple-strand chain.
 A normal bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not have an effect on the load capability. The much more sprockets at the rear wheel (historically 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought in accordance to the variety of speeds they are designed to operate with, for illustration, “ten speed chain”. Hub gear or solitary speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Normally chains with parallel formed hyperlinks have an even number of links, with every narrow link adopted by a broad a single. Chains constructed up with a uniform kind of link, narrow at one and broad at the other finish, can be manufactured with an odd variety of backlinks, which can be an gain to adapt to a special chainwheel-length on the other facet this kind of a chain tends to be not so strong.

Roller chains manufactured using ISO normal are often referred to as as isochains.

 

WHY Pick US 

one. CZPT ble High quality Assurance Program
2. Reducing-Edge Computer-Controlled CNC CZPT s
three. Bespoke Options from CZPT ly Experienced Experts
four. CZPT ization and CZPT Offered for Distinct Application
5. Comprehensive Stock of CZPT Parts and Accessories
six. Well-Created Throughout the world Advertising Community
seven. Successful Right after-Sale Support Method

 

The 219 sets of CZPT d computerized manufacturing tools give assures for large solution high quality. The 167 engineers and technicians with senior expert titles can design and style and develop products to satisfy the precise needs of CZPT ers, and CZPT CZPT izations are also CZPT with us. Our sound international service community can supply CZPT ers with timely soon after-product sales technical solutions.

We are not just a maker and provider, but also an sector advisor. We function professional-actively with you to provide professional tips and item recommendations in purchase to finish up with a most price effective solution CZPT for your distinct application. The consumers we serve CZPT assortment from conclude consumers to distributors and CZPT s. Our CZPT replacements can be substituted wherever necessary and appropriate for both fix and new assemblies.

 

 

Bushing Sprockets: Bushing sprockets can simplify chain system servicing by changing only worn sprocket assemblies, even though the bushings can nonetheless be reused. The bushing also has a tightly tapered mating area that can transmit larger torques than basic essential components. Shut-fitting surfaces give much better overall performance in purposes with large begin/end functions or shock loads.
China Gearbox Belt Mining Machinery Parts Transmission Conveyor Roller Chains 10b 48 Teeth Hub Sprocket with ce certificate top quality Good price

China Gearbox Belt Roller Chains Martin Conveyor Transmission Machinery Parts 10b 46 Teeth Hub Sprocket with ce certificate top quality Good price

Solution Description

SPROCKET  5/8” X 3/8”  10B Collection SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 sixteen.0mm
Radius Width C one.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 twenty five.5mm
Tooth Width B3 42.1mm
10B Collection ROLLER CHAINS  
Pitch 15.875 mm
Internal Width nine.65 mm
Roller Diameter ten.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
eight 47. forty one.forty eight twenty five 10 twenty five 25 12 forty twenty five 12 55
9 fifty two.6 46.forty two 30 ten twenty five 30 twelve forty 30 twelve 55
ten 57.5 51.37 35 ten twenty five 35 twelve 40 35 twelve 55
11 63. fifty six.34 37 12 thirty 39 fourteen forty 39 16 fifty five
12 68. sixty one.34 forty two twelve thirty forty four fourteen 40 44 16 fifty five
13 73. 66.32 47 12 30 forty nine 14 40 forty nine sixteen fifty five
fourteen 78. 71.34 fifty two 12 thirty fifty four fourteen 40 54 16 fifty five
15 eighty three. seventy six.36 fifty seven twelve thirty fifty nine 14 forty 59 16 fifty five
16 88. 81.37 60 twelve thirty sixty four sixteen 45 64 16 60
seventeen 93. 86.39 sixty 12 30 sixty nine sixteen 45 sixty nine sixteen 60
eighteen 98.3 91.forty two 70 14 thirty seventy four sixteen forty five 74 sixteen sixty
19 103.three 96.forty five 70 fourteen 30 79 16 forty five 79 sixteen sixty
20 108.four a hundred and one.forty nine seventy five fourteen 30 84 16 forty five 84 sixteen 60
21 113.four 106.fifty two 75 16 thirty eighty five 16 forty five 85 20 60
22 118. 111.fifty five eighty 16 30 90 sixteen 45 ninety twenty 60
23 123.5 116.58 eighty 16 thirty 95 sixteen forty five 95 20 sixty
24 128.3 121.sixty two eighty 16 30 100 16 forty five a hundred twenty 60
25 134. 126.66 eighty 16 thirty a hundred and five 16 forty five one hundred and five twenty 60
26 139. 131.70 eighty five 20 35 a hundred and ten 20 45 a hundred and ten 20 sixty
27 one hundred forty four. 136.seventy five 85 twenty 35 110 20 forty five a hundred and ten twenty sixty
28 148.seven 141.seventy eight ninety 20 35 one hundred fifteen 20 forty five a hundred and fifteen 20 60
29 153.8 146.eighty three ninety 20 35 one hundred fifteen 20 forty five a hundred and fifteen 20 sixty
thirty 158.8 151.87 90 20 35 120 twenty 45 a hundred and twenty 20 60
31 163.9 156.ninety two ninety five 20 35 one hundred twenty 20 forty five a hundred and twenty twenty 60
32 168.9 161.ninety five ninety five twenty 35 one hundred twenty 20 forty five one hundred twenty 20 sixty
33 174.five 167.00 ninety five 20 35 a hundred and twenty 20 forty five a hundred and twenty twenty sixty
34 179. 172.05 ninety five 20 35 one hundred twenty twenty 45 one hundred twenty twenty 60
35 184.1 177.10 95 twenty 35 120 20 45 120 20 sixty
36 189.one 182.fifteen a hundred 20 35 120 twenty forty five a hundred and twenty twenty five 60
37 194.2 187.20 one hundred twenty 35 one hundred twenty 20 45 120 25 sixty
38 199.2 192.24 100 twenty 35 120 twenty 45 120 twenty five sixty
39 204.two 197.29 a hundred twenty 35 120 20 forty five one hundred twenty 25 sixty
40 209.3 202.34 one hundred 20 35 120 twenty forty five one hundred twenty 25 sixty
forty one 214.8 207.38 *a hundred twenty forty one hundred twenty 20 50 *one hundred thirty 25 sixty
forty two two,199 212.forty three *a hundred 20 forty one hundred twenty twenty fifty *a hundred thirty twenty five 60
43 224.nine 217.forty eight *one hundred twenty 40 120 twenty fifty *130 25 60
44 230. 222.53 *one hundred 20 40 a hundred and twenty 20 50 *130 25 sixty
forty five 235. 227.58 *one hundred 20 forty *120 twenty 50 *130 twenty five sixty
forty six 240.one 232.63 *a hundred 20 forty *a hundred and twenty twenty 50 *130 twenty five sixty
forty seven 245.1 237.68 *100 20 40 *a hundred and twenty 20 50 *a hundred thirty twenty five sixty
forty eight 250.two 242.seventy three *100 twenty forty *one hundred twenty twenty 50 *one hundred thirty 25 60
forty nine 255.2 247.seventy eight *one hundred twenty 40 *120 20 fifty *one hundred thirty 25 sixty
fifty 260.3 252.eighty two *a hundred twenty forty *a hundred and twenty twenty 50 *one hundred thirty twenty five sixty
51 265.three 257.87 *a hundred twenty 40 *a hundred and twenty twenty 50 *130 twenty five sixty
52 270.4 262.92 *100 twenty forty *a hundred and twenty 20 50 *130 25 sixty
53 275.4 267.ninety seven *one hundred twenty forty *one hundred twenty 20 fifty *a hundred thirty 25 60
fifty four 280.five 273.03 *100 20 forty *a hundred and twenty twenty fifty *a hundred thirty 25 sixty
fifty five 285.five 278.08 *a hundred 20 40 *120 twenty fifty *one hundred thirty twenty five 60
fifty six 290.six 283.13 *100 twenty 40 *one hundred twenty twenty 50 *130 25 60
57 296. 288.18 *one hundred twenty 40 *a hundred and twenty twenty fifty *a hundred thirty 25 sixty
58 three hundred.seven 293.23 *a hundred twenty forty three *120 20 57 *a hundred thirty twenty five sixty four
59 305.7 298.28 *100 20 43 *one hundred twenty twenty fifty seven *one hundred thirty twenty five 64
60 310.eight 303.33 *a hundred twenty forty three *one hundred twenty twenty 57 *a hundred thirty twenty five sixty four
62 321.4 313.43 *100 20 43 *a hundred and twenty twenty fifty seven *one hundred thirty 25 sixty four
sixty four 331.five 323.53 *one hundred twenty 43 *a hundred and twenty twenty 57 *one hundred thirty 25 sixty seven
65 336.five 328.58 *one hundred 20 43 *one hundred twenty 20 fifty seven *130 25 67
sixty six 341.six 333.sixty four *one hundred 20 43 *a hundred and twenty twenty 57 *130 twenty five 67
68 351.7 343.seventy four *one hundred twenty 43 *a hundred and twenty twenty fifty seven *one hundred thirty twenty five sixty seven
70 361.eight 353.84 *one hundred 20 forty three *a hundred and twenty 20 57 *one hundred thirty 25 67
seventy two 371.nine 363.ninety four *100 20 43 *120 twenty 57 *a hundred thirty twenty five 67
seventy five 387.1 379.10 *one hundred twenty 43 *120 20 fifty seven *one hundred thirty twenty five 67
seventy six 392.one 384.fifteen *one hundred 20 forty three *120 20 57 *a hundred thirty twenty five 67
seventy eight 402.two 394.25 *one hundred twenty forty three *one hundred twenty 20 57 *130 25 67
eighty 412.3 404.36 *one hundred twenty forty three *a hundred thirty twenty fifty seven *130 twenty five sixty seven
85 437.six 429.62 *one hundred 20 50 *a hundred thirty 20 58 *130 25 67
ninety 462.eight 454.88 *100 20 50 *one hundred thirty twenty 58 *one hundred thirty 25 sixty seven
ninety five 488.5 480.fourteen *100 20 50 *one hundred thirty 20 58 *one hundred thirty twenty five sixty seven
100 513.four 505.40 *one hundred twenty 50 *130 twenty fifty eight *130 twenty five sixty seven
one hundred ten 563.nine 555.ninety two *one hundred 20 fifty *130 twenty fifty eight *one hundred thirty 25 67
114 584.1 576.thirteen *one hundred twenty 50 *130 twenty fifty eight *a hundred thirty twenty five sixty seven
one hundred twenty 614.4 606.45 *one hundred 20 50 *one hundred thirty 20 58 *a hundred thirty twenty five sixty seven
one hundred twenty five 639.seven 631.51 *one hundred twenty fifty *130 20 58 *a hundred thirty twenty five 67

Notice: *welding hub

Standard Details.
 

Product name  DIN ISO Normal CZPT for Roller Chain
Materials Available  one. Stainless Steel: SS304, SS316, and many others
two. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, and many others
3. CZPT  according to your request
Surface Remedy Heat treatment method, Quenching treatment method, CZPT frequency normalizing remedy, Polishing, CZPT ctrophoresis paint processing, Anodic oxidation therapy, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and many others
Design criterion ISO DIN ANSI & CZPT er Drawings
Measurement Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package deal Wooden Situation / Container and pallet, or CZPT
Certificate ISO9001: 2008 
Gain Quality very first, Provider very first, Competitive cost, CZPT delivery
Shipping and delivery Time twenty times for samples. 45 days for official order.

Installation AND Making use of

The chain  spoket, as a travel or deflection for chains, has pockets to maintain the chain hyperlinks with a D-profile cross area with flat aspect surfaces  parallel to the centre airplane of the chain back links, and outer surfaces at appropriate angles to the chain website link centre plane. The chain hyperlinks are pressed firmly towards the outer surfaces and every single of the facet surfaces by the angled laying surfaces at the foundation of the pockets, and also the help surfaces of the wheel entire body collectively with the stop sides of the webs shaped by the top and trailing walls of the pocket.

Recognize

When fitting new chainwheels it is very critical that a new chain is equipped at the exact same time, and vice versa. Making use of an previous chain with new sprockets, or a new chain with outdated sprockets will trigger speedy put on.

It is essential if you are putting in the chainwheels your self to have the factory service handbook distinct to your design. Our chainwheels are produced to be a immediate replacement for your CZPT chainwheels and as this kind of, the set up must be done according to your designs support manual.

In the course of use a chain will extend (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched a lot more than the over greatest allowance brings about the chain to experience up the enamel of the sprocket. This brings about hurt to the tips of the chainwheels tooth, as the power transmitted by the chain is transmitted entirely by way of the leading of the tooth, relatively than the total tooth. This results in extreme wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Expectations companies (this kind of as ANSI and ISO) sustain requirements for layout, dimensions, and interchangeability of transmission chains. For instance, the following Desk demonstrates information from ANSI normal B29.1-2011 (Precision CZPT Transmission Roller Chains, Attachments, and CZPT s) produced by the CZPT ican Society of CZPT Engineers (ASME). See the references[8][9][ten] for additional details.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile CZPT Measuring Load25

ASME/ANSI B29.1-2011 Roller Chain Common Measurements
Dimensions Pitch Highest Roller Diameter Minimum Ultimate Tensile CZPT Measuring Load
25 .250 in (6.35 mm) .130 in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.53 mm) .two hundred in (5.08 mm) one,760 lb (800 kg) 18 lb (8.2 kg)
forty one .five hundred in (12.70 mm) .306 in (7.seventy seven mm) 1,five hundred lb (680 kg) 18 lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.92 mm) 3,a hundred twenty five lb (1,417 kg) 31 lb (14 kg)
50 .625 in (15.88 mm) .four hundred in (10.16 mm) 4,880 lb (2,210 kg) forty nine lb (22 kg)
60 .750 in (19.05 mm) .469 in (eleven.91 mm) 7,030 lb (3,a hundred ninety kg) 70 lb (32 kg)
80 1.000 in (twenty five.40 mm) .625 in (fifteen.88 mm) twelve,five hundred lb (5,seven-hundred kg) 125 lb (fifty seven kg)
100 one.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
one hundred twenty one.500 in (38.10 mm) .875 in (22.23 mm) 28,a hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty 1.750 in (forty four.forty five mm) 1.000 in (25.forty mm) 38,280 lb (seventeen,360 kg) 383 lb (174 kg)
a hundred and sixty two.000 in (50.80 mm) one.one hundred twenty five in (28.58 mm) 50,000 lb (23,000 kg) five hundred lb (230 kg)
a hundred and eighty two.250 in (57.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (sixty three.50 mm) one.562 in (39.67 mm) seventy eight,175 lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (76.twenty mm) one.875 in (47.sixty three mm) 112,500 lb (fifty one,000 kg) 1,000 lb (450 kg

For mnemonic purposes, beneath is yet another presentation of important proportions from the identical standard, expressed in fractions of an inch (which was part of the thinking behind the choice of chosen quantities in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 1eight
38 threeeight threefive 3sixteen
1two four8 four1 14
onetwo foureight 4 five16
fiveeight fiveeight 5 38
three4 6eight six 12
one 88 8 5eight

Notes:
1. The pitch is the distance in between roller facilities. The width is the length between the website link plates (i.e. somewhat much more than the roller width to allow for clearance).
two. The right-hand digit of the standard denotes 0 = regular chain, 1 = lightweight chain, 5 = rollerless bushing chain.
three. The left-hand digit denotes the variety of eighths of an inch that make up the pitch.
4. An “H” pursuing the regular variety denotes heavyweight chain. A hyphenated quantity following the standard amount denotes double-strand (2), triple-strand (3), and so on. Therefore 60H-3 denotes number sixty heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) makes use of slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load capacity. The much more sprockets at the rear wheel (historically 3-6, today 7-twelve sprockets), the narrower the chain. Chains are bought according to the variety of speeds they are created to operate with, for illustration, “ten pace chain”. Hub gear or solitary speed bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the optimum thickness of a sprocket that can be utilized with the chain.

Usually chains with parallel shaped backlinks have an even amount of backlinks, with each and every slender website link adopted by a broad one particular. Chains constructed up with a uniform sort of website link, narrow at one particular and wide at the other stop, can be created with an odd variety of links, which can be an edge to adapt to a special chainwheel-length on the other facet such a chain tends to be not so robust.

Roller chains made using ISO regular are at times named as isochains.

 

WHY Pick US 

one. CZPT ble Quality Assurance Method
two. Reducing-Edge Laptop-Controlled CNC CZPT s
three. Bespoke Remedies from CZPT ly Experienced Professionals
4. CZPT ization and CZPT Obtainable for Distinct Application
five. Comprehensive Stock of CZPT Elements and Components
six. Well-Designed Worldwide Advertising Community
7. Effective After-Sale Service Program

 

The 219 sets of CZPT d automated creation gear supply guarantees for higher merchandise top quality. The 167 engineers and specialists with senior skilled titles can design and build merchandise to satisfy the specific requires of CZPT ers, and CZPT CZPT izations are also CZPT with us. Our seem worldwide services community can offer CZPT ers with timely soon after-sales specialized services.

We are not just a manufacturer and provider, but also an business expert. We work pro-actively with you to offer you expert guidance and merchandise tips in buy to conclude up with a most price successful item CZPT for your certain software. The clientele we provide CZPT selection from conclude consumers to distributors and CZPT s. Our CZPT replacements can be substituted anywhere necessary and ideal for both mend and new assemblies.

 

 

The enamel of a single pitch sprocket mesh with a single tooth for every sprocket. Double pitch sprockets search like one pitch sprockets, but the chain only meshes with the other teeth. This indicates that a double-pitch sprocket has the exact same amount of enamel as a solitary-pitch sprocket, but only 50 % of the teeth are engaged with the chain. The principal big difference is that the double pitch sprockets are lower with a particular pitch circle diameter for optimum engagement. For ep roller chains, the sprockets are the identical if the number of teeth is 32 or far more for one and double chains.
China Gearbox Belt Roller Chains Martin Conveyor Transmission Machinery Parts 10b 46 Teeth Hub Sprocket with ce certificate top quality Good price

China Belt Gearbox Parts Auto Parts Pilot Bore Transmission Motorcycle Conveyor Chains 08A 81 Teeth Sprocket with ce certificate top quality Good price

Item Description

SPROCKET  1/2” X 5/16”  08B Collection SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C one.3mm
Tooth Width b1 seven.0mm
Tooth Width B1 seven.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B Sequence ROLLER CHAINS  
Pitch twelve.7 mm
Internal Width 7.75 mm
Roller Diameter eight.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  eight 10 ten
9 forty one.0  37.13  eight 10 10
ten 45.2  forty one.10  8 10 ten
eleven forty eight.7  forty five.07  ten ten 12
twelve 53.0  49.07  ten ten 12
thirteen 57.4  53.06  10 ten 12
14 61.8  fifty seven.07  ten 10 12
15 65.5  sixty one.09  10 ten twelve
sixteen 69.5  65.10  10 12 sixteen
seventeen seventy three.6  sixty nine.11  10 12 sixteen
eighteen seventy seven.8  seventy three.14  10 twelve sixteen
19 81.7  seventy seven.16  10 twelve sixteen
twenty eighty five.8  eighty one.19  ten 12 sixteen
21 89.7  eighty five.22  12 16 16
22 93.8  89.24  12 16 sixteen
23 ninety eight.2  ninety three.27  twelve 16 16
24 101.8  ninety seven.29  twelve sixteen 16
twenty five a hundred and five.8  one hundred and one.33  12 16 16
26 110.0  105.36  sixteen sixteen 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  sixteen 16 sixteen
30 126.1  121.50  sixteen 16 sixteen
31 130.2  one hundred twenty five.54  sixteen sixteen twenty
32 134.3  129.56  16 sixteen twenty
33 138.4  133.60  16 16 twenty
34 142.6  137.64  sixteen sixteen twenty
35 146.7  141.68  sixteen sixteen 20
36 151.0  one hundred forty five.72  sixteen 20 twenty
37 154.6  149.76  sixteen twenty twenty
38 158.6  153.80  16 twenty twenty
39 162.7  157.83  16 20 20
40 166.8  161.87  sixteen 20 twenty
41 171.4  a hundred sixty five.91  20 20 twenty five
forty two 175.4  169.94  twenty 20 twenty five
forty three 179.7  173.98  twenty twenty twenty five
44 183.8  178.02  twenty 20 twenty five
45 188.0  182.07  twenty twenty twenty five
forty six 192.1  186.10  20 20 twenty five
47 196.2  190.14  twenty twenty 25
forty eight 200.3  194.18  20 20 twenty five
forty nine 204.3  198.22  20 twenty 25
50 208.3  202.26  twenty 20 twenty five
51 212.1  206.30  20 25 25
fifty two 216.1  210.34  20 twenty five 25
fifty three 220.2  214.37  twenty 25 25
fifty four 224.1  218.43  twenty 25 twenty five
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
fifty eight 240.5  234.58  twenty 25 25
fifty nine 244.5  238.62  20 twenty five twenty five
sixty 248.6  242.66  20 25 25
62 256.9  250.74  twenty five twenty five 25
sixty four 265.1  258.82  25 twenty five twenty five
sixty five 269.0  262.86  25 25 25
66 273.0  266.91  twenty five twenty five 25
68 281.0  274.99  twenty five 25 twenty five
70 289.0  283.07  twenty five twenty five twenty five
72 297.2  291.15  twenty five twenty five 25
seventy five 309.2  303.28  25 25 twenty five
76 313.2  307.32  twenty five 25 twenty five
seventy eight 321.4  315.40  twenty five twenty five 25
eighty 329.4  323.49  25 twenty five 25
85 349.0  343.69  25 twenty five twenty five
ninety 369.9  363.90  twenty five 25 25
95 390.1  384.11  25 twenty five twenty five
100 410.3  404.32  25 twenty five 25
110 450.7  444.74  twenty five 25 25
114 466.9  460.91  twenty five 25 25
a hundred and twenty 491.2  485.16  twenty five twenty five 25
a hundred twenty five 511.3  505.37  twenty five 25 twenty five

Standard Data.

Variety:

Simplex, Duplex, Triplex

Sprocket Product:

3/8″,1/2″,5/8″,3/4″,1″,1.twenty five”,1.50″,1.seventy five”,2.00″,2.25″,2.00″,2.twenty five”,2.fifty”, 3″

Enamel Number:

nine-one hundred

Common:

ANSI , JIS, DIN, ISO

Content:

1571, 1045, SS304 , SS316  As For each User Request.

Efficiency Treatment method:

Carburizing, CZPT Frequency Treatment method, Hardening and Tempering, Nitriding

Floor Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Design criterion ISO DIN ANSI & CZPT er Drawings
Software Industrial transmission products
Deal Picket Scenario / Container and pallet, or CZPT

Certification:

ISO9001 SGS

Good quality Inspection:

Self-check and Closing-examine

Sample:

ODM&OEM, Demo Order Offered and Welcome

Gain Top quality 1st, Services 1st, Aggressive cost, CZPT supply
Supply Time ten days for samples. 15 times for official order.

 

Installation AND Using

The chain spocket, as a travel or deflection for chains, has pockets to hold the chain back links with a D-profile cross part with flat facet surfaces  parallel to the centre plane of the chain back links, and outer surfaces at proper angles to the chain url centre aircraft. The chain back links are pressed firmly towards the outer surfaces and each of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the assistance surfaces of the wheel body collectively with the end sides of the webs formed by the leading and trailing walls of the pocket.

Observe

When fitting new chainwheels it is really crucial that a new chain is fitted at the same time, and vice versa. Making use of an outdated chain with new sprockets, or a new chain with outdated sprockets will cause speedy put on.

It is crucial if you are setting up the chainwheels your self to have the manufacturing unit service handbook distinct to your design. Our chainwheels are made to be a immediate substitute for your CZPT chainwheels and as this sort of, the installation ought to be performed in accordance to your types support manual.

For the duration of use a chain will extend (i.e. the pins will put on leading to extension of the chain). Utilizing a chain which has been stretched much more than the over optimum allowance triggers the chain to trip up the teeth of the sprocket. This triggers damage to the suggestions of the chainwheels teeth, as the pressure transmitted by the chain is transmitted totally by means of the top of the tooth, relatively than the complete tooth. This benefits in extreme donning of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements companies (such as ANSI and ISO) sustain expectations for style, proportions, and interchangeability of transmission chains. For example, the adhering to Table shows data from ANSI common B29.1-2011 (Precision CZPT Transmission Roller Chains, Attachments, and CZPT s) produced by the CZPT ican Modern society of CZPT Engineers (ASME). See the references[8][9][10] for extra information.

ASME/ANSI B29.1-2011 Roller Chain Common SizesSizePitchMaximum Roller DiameterMinimum Greatest Tensile CZPT Measuring Load25

ASME/ANSI B29.1-2011 Roller Chain Normal Dimensions
Measurement Pitch Greatest Roller Diameter Bare minimum Greatest Tensile CZPT Measuring Load
25 .250 in (6.35 mm) .one hundred thirty in (3.30 mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.fifty three mm) .200 in (5.08 mm) one,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .500 in (12.70 mm) .306 in (7.77 mm) 1,five hundred lb (680 kg) 18 lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.92 mm) 3,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
fifty .625 in (fifteen.88 mm) .400 in (10.sixteen mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
sixty .750 in (19.05 mm) .469 in (11.91 mm) seven,030 lb (3,one hundred ninety kg) 70 lb (32 kg)
eighty 1.000 in (twenty five.40 mm) .625 in (fifteen.88 mm) 12,five hundred lb (5,seven hundred kg) one hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 one.five hundred in (38.10 mm) .875 in (22.23 mm) 28,125 lb (twelve,757 kg) 281 lb (127 kg)
a hundred and forty one.750 in (44.forty five mm) one.000 in (25.forty mm) 38,280 lb (seventeen,360 kg) 383 lb (174 kg)
160 two.000 in (fifty.eighty mm) 1.one hundred twenty five in (28.fifty eight mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
one hundred eighty two.250 in (57.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,700 kg) 633 lb (287 kg)
200 two.500 in (sixty three.50 mm) 1.562 in (39.sixty seven mm) 78,a hundred seventy five lb (35,460 kg) 781 lb (354 kg)
240 three.000 in (76.20 mm) one.875 in (forty seven.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic reasons, below is another presentation of crucial proportions from the identical regular, expressed in fractions of an inch (which was component of the thinking guiding the decision of preferred quantities in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain amount
Width (inches)
one4 2eight 2five 1eight
3eight 3eight 35 three16
1two 4eight 4one onefour
one2 foureight four 5sixteen
58 5eight 5 3eight
3four 68 six 1two
1 88 8 fiveeight

Notes:
one. The pitch is the length between roller centers. The width is the length between the hyperlink plates (i.e. somewhat more than the roller width to permit for clearance).
2. The correct-hand digit of the standard denotes 0 = standard chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” pursuing the common quantity denotes heavyweight chain. A hyphenated quantity following the regular quantity denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes amount sixty heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) utilizes slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load potential. The a lot more sprockets at the rear wheel (historically 3-6, nowadays 7-twelve sprockets), the narrower the chain. Chains are bought according to the number of speeds they are made to work with, for illustration, “10 velocity chain”. Hub gear or solitary velocity bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the greatest thickness of a sprocket that can be employed with the chain.

Generally chains with parallel shaped backlinks have an even quantity of hyperlinks, with every single narrow link adopted by a broad 1. Chains developed up with a uniform kind of url, slender at a single and wide at the other end, can be produced with an odd variety of back links, which can be an gain to adapt to a special chainwheel-length on the other aspect such a chain tends to be not so sturdy.

Roller chains made employing ISO standard are sometimes called as isochains.

 

WHY Choose US 
 

one. CZPT ble Top quality Assurance System
2. Cutting-Edge Laptop-Managed CNC CZPT s
3. Bespoke Options from CZPT ly Experienced Specialists
4. CZPT ization and CZPT Accessible for Distinct Software
5. Substantial Stock of CZPT Elements and Accessories
six. Well-Designed Worldwide Advertising Network
seven. Productive Right after-Sale Support Program

 

The 219 sets of CZPT d automatic generation products give ensures for high merchandise high quality. The 167 engineers and experts with senior professional titles can design and produce products to meet the actual needs of CZPT ers, and CZPT CZPT izations are also CZPT with us. Our seem global service community can give CZPT ers with timely following-income technical companies.

We are not just a maker and supplier, but also an sector specialist. We function pro-actively with you to offer you expert advice and product recommendations in order to conclude up with a most expense powerful solution CZPT for your distinct application. The clients we serve CZPT variety from stop end users to distributors and CZPT s. Our CZPT replacements can be substituted where ever required and ideal for both restore and new assemblies.

 

Method performance is highly dependent on the conversation of the sprockets, which signifies that the sprockets you choose generate the good results of your procedure. Make the right and simple decision with ep’s sprockets. Tsubaki supplies chain and sprocket manufacturing abilities. The chain meshes nicely with the sprockets for lengthy services lifestyle and dependable functionality. This means prolonged-term cost savings and actual price for your operations. Lessen maintenance downtime, improve productivity and lessen alternative charges
China Belt Gearbox Parts Auto Parts Pilot Bore Transmission Motorcycle Conveyor Chains 08A 81 Teeth Sprocket with ce certificate top quality Good price